Gas booster
Equipment integrated
into a control panel
High Compression Ratio, Ultra-small Footprint
Our NEO Booster gas booster achieves the largest possible compression ratio for its ultra-small footprint using a one-of-a-kind electric gear mechanism. It attains discharge pressure as high as 30MPa from intake pressure as low as 0.6MPa. The multi booster can handle a wide range of pressures, from moderately high to ultra-high pressure. As it does not require any lubrication oil, it is an optimal device for high-pressure compression of nitrogen and other gases. It also features the lowest running costs (power consumption) and maintenance costs in its class.
NEO Booster Features
- Ultra-small footprint
- Highly energy-efficient
- Oil-free design enables handling of a variety of gas types
- Much less noise than pneumatic compressors
- Easy replacement of the piston ring cuts maintenance cost to a minimum
- All gas outlets are equipped with a cooling mechanism, greatly reducing compression heat emissions
- Compliant with the High Pressure Gas Safety Act
NEO Booster Main Specifications
High pressure (>30MPa) and medium pressure (5 - 15MPa) devices are also available. We are happy to customize our designs to your specific needs.
High pressure booster specifications (for nitrogen)
Type |
NEO60-40/17 | NEO90-40/17 | NEO200-60/24 |
|---|---|---|---|
| Max. Capacity (NL/min) | 40 | 60 | 140 |
| Inlet Pressure (MPa) | 0.55 | ||
| Discharge Pressure (MPa) | Approx. 30 | ||
| Compression Method | 2nd Stage Compression | ||
| Electric Motor (kW) | 2.2 | 2.2 | 3.7 |
| Cooling Method | Water Cooling | ||
| Size (W×D×H; mm) | 800 × 400 × 450 | 800 × 400 × 450 | 1200 × 480 × 550 |
・Specifications may vary depending on the type of gas used.
・Product specifications are subject to change without prior notice according to product improvements.
Low pressure booster specifications (for nitrogen)
Type |
NEO60-40/40 | NEO90-40/40 | NEO200-60/60 |
|---|---|---|---|
| Max. Capacity (NL/min) | 80 | 120 | 280 |
| Inlet Pressure (MPa) | 0.55 | ||
| Discharge Pressure (MPa) | 1-4 | ||
| Compression Method | 1st Stage Compression | ||
| Electric Motor (kW) | 2.2 | 2.2 | 3.7 |
| Cooling Method | Water Cooling | ||
| Size (W×D×H; mm) | 800×400×450 | 800×400×450 | 1200×480×550 |
・Specifications may vary depending on the type of gas used.
・Product specifications are subject to change without prior notice according to product improvements.
